3M Safety-Walk Slip-Resistant General Purpose Tape 613

Black/Yellow Hazard Stripe | For High-Traffic Industrial Safety
NFSI Certified for High Traction

The 3M™ Safety-Walk™ Slip-Resistant Tape 613 is a mineral-coated, abrasive tape designed to enhance safety in light to heavy shoe-traffic areas, particularly where slip hazards and visual warnings are required. Featuring a black/yellow diagonal stripe design, this high-visibility tape helps identify and alert personnel to hazardous zones, while delivering excellent anti-slip performance even in wet, dry, or oily conditions.

Constructed with a durable resin-bonded abrasive layer on a pressure-sensitive adhesive-backed plastic film, the tape is ideal for use on corridors, stairways, ramps, ladders, machine footplates, and emergency exits in industrial and commercial environments. The product has been certified by the National Floor Safety Institute (NFSI) as providing "high-traction", proven to help reduce slip-and-fall incidents significantly.

🌟 Key Features

• ⚠️ Visual Hazard Indicator – High-contrast black/yellow diagonal pattern provides early warning of danger zones

• 👣 High-Traction Surface – Mineral-coated for reliable grip in light to heavy pedestrian or light vehicle traffic

• 💧 Performs in Wet & Oily Conditions – Suitable for use in industrial settings exposed to moisture and grease

• 🛠 Durable Adhesion – Pressure-sensitive adhesive ensures secure bond to clean, dry surfaces

• ✅ NFSI Certified – Exceeds the 0.60 wet SCOF standard for high-traction performance

✅ Recommended Applications

• Production floors and warehouse corridors

• Stairs, ramps, and ladder rungs

• Walkways in oil-prone or wet environments

• Machine footplates and maintenance platforms

• Emergency exits and high-risk access points

✅ Installation Temperature

• Recommended surface and ambient temperature: 4°C to 38°C (40°F to 100°F)

✅ Application Steps

1. Surface Preparation

   • Ensure the surface is clean, dry, smooth, and free of oil or contaminants

   • Use a degreaser or isopropyl alcohol for cleaning

   • For rough or porous surfaces, apply a primer (e.g., 3M™ Primer 94) to improve adhesion

2. Cutting the Tape

   • Cut the tape to the required length

   • Round the corners to minimize edge lifting

3. Applying the Tape

   • Peel back part of the release liner and position the tape

   • Gradually remove the liner while pressing the tape firmly onto the surface

   • Apply firm, even pressure across the tape as you go

4. Use a Roller for Bonding

   • Use a rubber hand roller to press the tape down

   • Start from the center and roll outward to ensure full contact and remove air bubbles

5. Edge Sealing (Optional but Recommended)

   • For extra durability and water resistance, apply 3M™ Edge Sealer along the tape edges

✅ Curing Time

• Full bond strength develops in 24–48 hours

• Avoid heavy traffic during this time

✅ Maintenance

• Clean with mild detergents and water

• Avoid harsh chemicals that may degrade the adhesive

• Inspect regularly for wear or lifting and replace as needed

Our company offers anti-slip assessment and treatment services. For more details, please contact us.