3M Safety-Walk Edge Sealing Compound 902

For Enhanced Adhesion & Moisture Protection

The 3M™ Safety-Walk™ Edge Sealing Compound 902 is a specially formulated adhesive sealant designed to protect the edges of 3M™ Safety-Walk™ Slip-Resistant Tapes and Treads. This sealing compound enhances durability by preventing edge lifting and blocking out water, dirt, and other contaminants, which can compromise adhesion over time.

Ideal for high-moisture or high-traffic environments, this edge sealer is essential when applying anti-slip tapes in areas where frequent cleaning, wet conditions, or heavy foot traffic may occur—such as commercial kitchens, pool decks, ramps, and industrial facilities.

🌟 Key Features

• 🛡 Edge Protection – Seals tape edges to prevent lifting, curling, and peeling

• 💧 Moisture Barrier – Helps block water and contaminants from undermining adhesion

• 🚶♂️ Durability Enhancer – Extends the life of 3M™ Safety-Walk™ tapes in demanding environments

• 🧰 Easy Application – Comes in a convenient tube for quick and clean application

✅ Recommended Use

• With 3M™ Safety-Walk™ Tapes and Treads

• Areas exposed to moisture, cleaning agents, or heavy wear

• Indoor and outdoor use

✅ Installation Temperature

• Recommended surface and ambient temperature: 4°C to 38°C (40°F to 100°F)

✅ Application Steps

1. Surface Preparation

   • Ensure the surface is clean, dry, smooth, and free of oil or contaminants

   • Use a degreaser or isopropyl alcohol for cleaning

   • For rough or porous surfaces, apply a primer (e.g., 3M™ Primer 94) to improve adhesion

2. Cutting the Tape

   • Cut the tape to the required length

   • Round the corners to minimize edge lifting

3. Applying the Tape

   • Peel back part of the release liner and position the tape

   • Gradually remove the liner while pressing the tape firmly onto the surface

   • Apply firm, even pressure across the tape as you go

4. Use a Roller for Bonding

   • Use a rubber hand roller to press the tape down

   • Start from the center and roll outward to ensure full contact and remove air bubbles

5. Edge Sealing (Optional but Recommended)

   • For extra durability and water resistance, apply 3M Safety-Walk Edge Sealing Compound 902 along the tape edges

✅ Curing Time

• Full bond strength develops in 24–48 hours

• Avoid heavy traffic during this time

✅ Maintenance

• Clean with mild detergents and water

• Avoid harsh chemicals that may degrade the adhesive

• Inspect regularly for wear or lifting and replace as needed

Our company offers anti-slip assessment and treatment services. For more details, please contact us.